|
|
Switching benchtop power supply 0-30 V, 0-5 A
Galia, Jan ; Pazdera, Ivo (referee) ; Martiš, Jan (advisor)
This thesis deals with the design and construction of switching mode power supply for lab application. Convertor is based on the forward topology with adjustable output voltage regulation from 0 to 30V and with maximal output current 5A. Antoher features of this power supply is adjustable current limiting function which can be set from 0 to 5A. For closed loop control was chose analogue cascade regulation.The contol part consists of operation amplifire TL072 and SG3525 contorl circuit.
|
|
|
USB controlled voltage and current source
Pytela, Ondřej ; Kubánek, David (referee) ; Lattenberg, Ivo (advisor)
This diploma thesis is focused on complete construction of lab source which is controlled and powered by USB in personal computer. Different types of possible solutions are mentioned and finally one of them has been picked up as a best choice, which is developed in the rest of this thesis. Besides hardware construction there is also shown creation of main program for PIC18F14K50 microcontroller and main application that provides controlling of USB source via personal computer.
|
|
|
Communication module for power supplies controlling
Zachar, Jiří ; Šmíd, Petr (referee) ; Dřínovský, Jiří (advisor)
The aim of this work is to design a communication module for laboratory source Manson. This power supply communicates only through a serial RS-232 link. Modern computers usually use for the connection with other peripherals mainly USB. Designed communication module contains converter between the RS-232 and USB. Power supply is used in the automated measurement setup, which is controlled from the Virtual Engineering Environment from the Agilent Technologies. Direct commands for laboratory source Manson are not compatible with the SCPI (Standard Commands for Programmable Instruments) standard commands. So, the communication module converts commands from the SCPI format to Manson supply instructions. The communication with the Manson supply will be obvious for students by using new communication module.
|
|
|
Lab power supply 0-100 V / 0-100 mA
Hanzl, Ondřej ; Pazdera, Ivo (referee) ; Martiš, Jan (advisor)
The thesis deals with the design of a laboratory source of atypical parameters of the voltage range 0 – 100 V and current 0 – 100 mA, which will be used for testing LEDs, measuring the reverse voltage and characteristics of Zener diodes of unknown data. The power supply will operate in linear mode, where the output part make up a power unipolar transistor controlled by a controlled bipolar transistor. The control section controlling this output stage is a closed control loop with two PI controllers, a differential amplifier and a controlled limiter. In the control circuit, the controllers are arranged in a cascade structure, where the voltage regulator is superior to the current one. Power supply is provided by 2 transformers, one for the power part and the other for the control part. All designed and assembled components will be then placed in a box equipped with a digital measuring device with display.
|
|
|
Controled laboratory voltage suplier
Vít, Tomáš ; Valach, Soběslav (referee) ; Macho, Tomáš (advisor)
The aim of my master’s thesis is the design and implementation of laboratory power supply with output parameters 0-25V and 0-2A and options to manage this resource by elements of the front panel or via a computer control program. Content is the theoretical analysis of the possibility of subsequent theoretical sources suggesting that it verified on the prototype laboratory resources.
|
|
|
Two-quadrant regulated power supply for laboratory purposes
Kalus, Jiří ; Vorel, Pavel (referee) ; Knobloch, Jan (advisor)
The main goal of the bachelor´s thesis is a suggestion of switching power supply with energy absorption for the case of two-quadrant load. The source includes of three parts: the power for the control circuit, single-converter and absorber of the recovered energy. Output power source is 400 W and output voltage 0 to 40 V, current +10 / - 10 A. This bachelor´s thesis deals with the first half of the circuit description and the second part there are analysis and the suggestion. Scheme and printed circuit cards are in attachment.
|
|
|
Design and construction of double laboratory power supply
Klein, Miroslav ; Šebesta, Jiří (referee) ; Brančík, Lubomír (advisor)
This semester thesis deals with design of double laboratory DC power supply with adjustable voltage and current limitation. Power supply can work in two states. First state allows regulation of output voltage from 0V to 40V and current limitation from 0A to 3A. In second state the range of output voltage is from 0V to 18V and output current can be set from 0A to 6A. Both supplies are galvanically separated and can work independently, or can be combined. Whole power supply is digitally controlled by microcontroller.
|
|
|
Digitally controlled power supply
Stupka, Dominik ; Drexler, Petr (referee) ; Szabó, Zoltán (advisor)
This document describes design of the laboratory power supply with digital control. Power control consists from a control section which handles communication between the modules and the power section.Into the power section is integrated switching and linear regulator. The designed power supply contains two such modules. To control are used microcontrollers from Atmel. Source parameters are 2 x 30 V / 0 – 3 A. During the construction we have to emphasis on the accuracy of regulation the output values and the modularity of the solution.
|
|
|
Mikroprocesor control for laboratory power source
Hauer, Petr ; Kubásek, Radek (referee) ; Szabó, Zoltán (advisor)
This bachelor thesis aims to design and implementation a laboratory power supply controlled by microprocessor and PC via USB. The theoretical part describes the USB bus and the manner of its implementation to the microprocessor. There are the basic types of switching and linear sources and methods of control by a microprocessor. The practical part deals with the design and implementation of the resource. The results of this work are the themes of control and power part of power supply, printed circuit boards, software for the PC and microprocessor and measurements on the completed source.
|
|
|
Design of regulated laboratory source with current measurement
Panáček, Jiří ; Šteffan, Pavel (referee) ; Magát, Martin (advisor)
This bachelor thesis deals with problematic and design of linear laboratory power supply. The first impulse start design of this device was requirement of simple and low cost laboratory power supply with good performance for debugging and measuring electronic circuits. This design keeps modern trend in lab power supplies with driving via microcontroller. This solution makes device easy to control and it is possible change program equipment.
|
guest ::
